Water Care
Showing 28–33 of 33 results
-
Resist (500g) – Alkalinity Increaser
$10.99 LEARN MOREAdd to cartBeachcomber Resist is a finely ground granular product that contains sodium bicarbonate. It raises the Total Alkalinity (TA) level in your hot tub water to prevent pH bounce, corrosion, scaling and staining. Total Alkalinity in the proper range (100-120 ppm) maintains the correct pH, makes the water ‘resist’ changes in pH and increases the effectiveness of the sanitizer.
Application
- Test Total Alkalinity level (correct range : 100-120 ppm). Beachcomber 6 Ways Water Test Strips
- To raise Total Alkalinity by 10 ppm, add 18g per 1000 L
- Add Resist to the centre of the hot tub
Water Balance Parameters
Total Alkalinity (100 – 120 PPM)
Total Alkalinity is a measure of alkaline salts in the water. It acts as a buffer to the pH, helping to hold the pH at 7.2 – 7.8. If the Total Alkalinity is low, the pH will tend to stay lower as well. If the Total Alkalinity is high, the pH will tend to drift higher. When the Total Alkalinity level is out of range, the result is a highly unbalanced water condition, which can cause damage to copper heater elements, light rings, stainless steel fittings, dials, ladders, and concrete pool surfaces.
What to do?
-
RESIST 2 KG
$30.99 LEARN MOREAdd to cartBeachcomber Resist is a finely ground granular product that contains sodium bicarbonate. It raises the Total Alkalinity (TA) level in your hot tub water to prevent pH bounce, corrosion, scaling and staining. Total Alkalinity in the proper range (100-120 ppm) maintains the correct pH, makes the water ‘resist’ changes in pH and increases the effectiveness of the sanitizer.
Application
- Test Total Alkalinity level (correct range : 100-120 ppm). Beachcomber 6 Ways Water Test Strips
- To raise Total Alkalinity by 10 ppm, add 18g per 1000 L
- Add Resist to the centre of the hot tub
Water Balance Parameters
Total Alkalinity (100 – 120 PPM)
Total Alkalinity is a measure of alkaline salts in the water. It acts as a buffer to the pH, helping to hold the pH at 7.2 – 7.8. If the Total Alkalinity is low, the pH will tend to stay lower as well. If the Total Alkalinity is high, the pH will tend to drift higher. When the Total Alkalinity level is out of range, the result is a highly unbalanced water condition, which can cause damage to copper heater elements, light rings, stainless steel fittings, dials, ladders, and concrete pool surfaces.
What to do?
-
SKIRT POLISH 450 ML
$12.99 LEARN MORESKIRT POLISH cleans, polishes and protects in a single operation, giving new life and a high gloss to your skirt or any other wood, metal, vinyl.Add to cart -
Soft (900G) Water Enhancer
$27.99 LEARN MOREBeachcomber Soft is a granular product that enhances water quality and comfort. It has the ability to stabilize changes in pH and also prevents corrosion, scale and staining by keeping water in a balanced state which protects the hot tub equipment and fixtures. Easily soluble in water with a pleasant green apple scent, Soft produces pleasant, smooth feeling and silky hot tub water.Add to cart
Application
- Before you add Soft, always make sure that pH has been adjusted to 7.2-7.8 to get the maximum effect of Soft’s ability
Start-up
- Add 150 g of Soft per 1000 L of hot tub water
- Add directly into skimmer or springle lightly into hot tub water with pump running
Maintenance
- To maintain proper levels add 40g of Soft per 1000 L of hot tub water weekly
-
Tub Clean (500ml) – Acrylic Surface Cleaner
$12.99 LEARN MOREAdd to cartBeachcomber Tub Clean is a fast acting surface cleaner. It is used for the removal of scum line, dirt, scale, stains, grease or oil build-up on hot tub surfaces. Its environmentally friendly nature comes from a citrus based formula that is fully biodegradable. Tub Clean has hydrophobic virtue and can remove oils on contact. It also has the ability to create foam so it’s important to minimize contact of the product with your hot tub water. This product pH is 2.1, making it an excellent acidic cleaner for oils and organics.
Application
- Tub Clean should not come in contact with hot tub water
- Wipe hot tub surface at water line with Tub Clean directly from the bottle. Use a non-abrasive cleaning tool such as sponge, cloth or soft brush.
- Wipe and rinse well with water
-
Ultra Shock (900g) – Non-Chlorine Oxidizer
$35.99 LEARN MOREAdd to cartBeachcomber ULTRA SHOCK is a highly soluble, finely ground granular, 100% non-chlorine oxidizing product that contains Potassium monopersulfate. This oxidizer works in conjunction with a sanitizing product such as BROMO DISCS or BROMO BLAST. Together these products will control bacteria, algae, viruses, and pathogens in hot tub water.
Application
- Add 125 g of UltraShock per 1000L of hot tub water to release bromine sanitizer
- Maintain water circulation at least 30 minutes before using
- Test your water and maintain the proper Bromine level by adding 30 g of Ultra Shock per 1000L of hot tub water, daily or as needed. Beachcomber 6 Ways Water Test Strips
Water Balance ParametersGovernment approved recommended ranges for keeping hot tub clean and balanced